QVI® FlexPoint™
Description
QVI FlexPoint 111 / 212 is a high accuracy tactile flexible gaging system. It provides an alternative to custom hard gaging and is designed for measurement of small precision parts. With the stability of a granite structure and its air bearing motion system, FlexPoint is equally at home on the manufacturing floor or in the QC laboratory.
FlexPoint comes equipped with New QVI ZONE3 premium CAD-based 3D metrology software.
• Touch trigger or scanning probe
• Shop floor friendly
• QVI ZONE3 premium CAD-based 3D metrology software
Technical Specs Tab
| FlexPoint |
Standard |
Optional |
| XYZ travel, FlexPoint 111 | 160 x 100 x 160 mm | |
| XYZ travel, FlexPoint 212 | 220 x 160 x 220 mm | |
| XYZ scale resolution | 0.5 μm | 0.1 µm temperature invariant |
| Drive system | DC servo with 3-axis control (X,Y,Z); multifunction handheld controller | |
| Maximum recommended load | 7 kg | |
| Maximum velocity | 250 mm/sec | |
| Probe configurations | With included docking station, choose from the following:
|
|
| Controller | Windows® based, with up-to-date processor and on board networking/communication ports | |
| Controller accessory package | 24” flat panel LCD monitor, or dual 24” flat panel LCD monitors; keyboard, 3-button mouse (or user supplied) | |
| Software | QVI Portal, including:
|
Productivity software: SmartProfile®, SmartReport® |
| Power requirements | 115/230 vac, 50/60 Hz, 1 phase, 700 W | |
| Air requirements | Clean, dry compressed air at 4 bar (60 psi) | |
| Rated environment | Temperature 18-22° C, stable to ±2° C (±4° F); 30-80% humidity; vibration <0.0015g below 15 Hz | |
| Operating environment, safe operation | 15-30° C | |
| Accuracy1 | MPE = (1.0 + L/300) µm; Max = 1.5 µm (with TP20) e | |
1Where L = measuring length in mm. Applies to thermally stable system in rated environment, with a certified artifact at 20° C Maximum rate of temperature change: 2° C/hour. Maximum vertical temperature gradient: 1° C/meter. Compliant with ISO 10360 Standards
